How to select screens Contact us
SuperView
Multi-Input Display Processor

Now you can display multiple live video images and graphic inputs on a single monitor or projector. With up to 10 simultaneous input signals, the SuperView processor offers a better alternative to videowalls and other arrays of monitors or projectors.
The SuperView was developed for sophisticated display applications, from multi-source presentations to control rooms -wherever several signal sources must be displayed simulataneously.

The processor is easily installed and compatible with virtually all PCs and workstations. Functions can be controlled either from the easy-to-use front panel or remotely via the RS-232 port. Optional VCP software controls the system under Windows 95/98/2000/NT.

Designed for maximum flexibility, the SuperView system is an excellent solution for applications requiring large screen projection, remote video monitoring, command-and-control, teleconferencing and multimedia display.

Display alternatives are virtually infinite, and include side-by-side, picture-in-picture, and even overlapping windows. In addition, each input can be panned and zoomed to emphasize areas of particular interest. Output resolution is user-selectable or locked to a background signal.

Technical Specifications
SuperView
Input Signals (in windows)
Type RGB
NTSC/PAL composite video, S-Video signals
Horizontal
scan rate
15kHz to 90kHz interlaced
or non-interlaced
Resolution 640 x 480 to 1280 x 1024 pixels
Video levels 0.7V to 1.0V
Sync type Sync on green, separate composite sync or separate H-Drive and V-Drive
Connectors RGB: 15-pin HD D-Sub (male)
Composite: BNC (female)
S-Video: 4-pin mini DIN (female)
Image controls Position, scaling, freeze frame, pan and zoom, brightness,
contrast, saturation, hue, gamma, chroma key, motion filter
Input Signals (in background)
Horizontal
scan rate
15kHz to 100kHz interlaced
or non-interlaced
Resolution 640 x 480 to 1600 x 1200 pixels
Video levels 0.7V to 1.0V
Sync type Sync on green, separate composite sync or separate H-Drive and V-Drive
Connectors 13W3 Coax-mix D-Sub (female)
Output Signal
Range Same as Input Signal (in background)
Mode 1 Locked to an input signal, which may be display in the background
Mode 2 User configurable internally generated sync
Other
Control RS-232 and front panel
Optional VCP control software
Power* 100-260 VAC, 47-63Hz
Less than 100 Watts
Size* Width 17.5" (44.5 cm)
Depth 18.0" (45.7 cm)
Height 3.5" (8.9 cm)
Rackmount 2U/3U rackmount kits available
Weight Approximately 22 lbs. (10kg.)
* Larger systems may require a 3U enclosure and bigger power supply


Front and back panel configuration for a SuperView VGAplus-2/4



PDF

Top